KE300A-05 series "industrial washing machine" special inverter
It is a dedicated CNC automatic industrial washing machine. Compared with the traditional industrial washing machine drive control system, the program part has made advanced current limiting technology and hardware for the application characteristics of the three washing programs of industrial washing machine: uniform, medium and high washing Optimize the design and add a wide range of high-speed output mode for industrial washing machines to achieve the most ideal washing effect and significantly reduce the mechanical impact, so that the washing machine always works in an optimal state. Industrial washing machines are widely used in hotels, hotels, hospitals, schools, garment factories, washing plants, industrial and mining enterprises and other occasions.
(1) Easy to install and debug
(2) Robust EMC design
(3) Modular design with very flexible configuration
(4) The main control system uses 32-bit high-speed DSP, integrated PG-free vector control, V / f control, and torque control.
(5) The optimized motor parameter identification model can effectively reduce the sensitivity to motor parameters and make self-learning more accurate. Support static self-learning.
(6) High starting torque: In the vector control mode without PG, at 0.5 Hz, it can provide 150% of the starting torque;
(7) Excellent robust performance can ensure that the load can start and stop quickly;
(8) Fast dynamic response: Under the vector control mode without PG, the dynamic response time is less than 20ms;
(9) Fast current limiting function: it can quickly limit the current within the protection point, reducing the probability of frequent overcurrent alarm failure.
(10) High power factor output, reduced reactive power loss, and no large current impact during soft start.
(11) Built-in PID regulator can easily form a closed-loop control system for process quantities such as temperature, pressure and flow.
(12) It has automatic fault reset and power-off reset functions to ensure continuous production and production efficiency.
(13) Adopting advanced power module driving mode, high power factor, can effectively suppress harmonics, and eliminate interference to peripheral control loops and sensors during inverter operation.
(14) Perfect protection functions: overvoltage / under-voltage protection, inverter overheat protection, ground fault protection, short circuit protection, overcurrent protection, overload protection, etc.
1AC 220V±15%, 3AC 380V±15%
0～rated input voltage
V/f control: 0~3000HzSensorless vector control: 0~300Hz
Operation command mode
Keypad controlTerminal controlSerial communication control
Frequency setting mode
Digital setting, analog setting, pulse frequency setting, serial communication setting, multi-step speed setting & simple PLC, PID setting, etc. These frequency settings can be combined & switched in various modes.
G model: 150% 60s, 180% 10s, 200% 3sP model: 120% 60s, 150% 10s, 180% 3s
0.5Hz/150% (SVC); 1Hz/150% (V/f)
Speed adjustment range
1:100 (SVC), 1:50 (V/f)
1.0-16.0kHz，automatically adjusted according to temperature and load characteristics
Digital setting: 0.01HzAnalog setting: maximum frequency * 0.05%
Automatically torque boost; manually torque boost: 0.1%~30.0%
Three types: linear, multiple point and square type (1.2 power, 1.4 power, 1.6 power, 1.8 power, square)
Acceleration/decele ration mode
Straight line/S curve; four kinds of acceleration/deceleration time, range: 0.1s~3600.0s
DC braking when starting and stoppingDC braking frequency: 0.0Hz~maximum frequency, braking time: 0.0s~100.0s
Jog operation frequency: 0.0Hz~maximum frequencyJog acceleration/deceleration time: 0.1s~3600.0s
Simple PLC & multi-step speed operation
It can realize a maximum of 16 segments speed running via the built-in PLC or control terminal.
Built-in PID control to easily realize the close loop control of the process parameters (such as pressure, temperature, flow, etc.)
Automatic voltage regulation
Keep output voltage constant automatically when input voltage fluctuating
Common DC bus
Common DC bus for several inverters, energy balanced automatically
Torque control without PG
“Rooter” characteristics, limit the torque automatically and prevent frequent over-current tripping during the running process
Wobble frequency control
Multiple triangular-wave frequency control, special for textile
Timing/length/counting control function
Over-voltage & over-current stall control
Limit current & voltage automatically during the running process, prevent frequent over-current & over-voltage tripping
Fault protection function
Up to 30 fault protections including over-current, over-voltage, under-voltage, overheating, default phase, overload, shortcut, etc., can record the detailed running status during failure & has fault automatic reset function
Programmable DI: 7 on-off inputs, 1 high-speed pulse input 2 programmable AI: AI1: 0～10V or 0/4～20mA A12: 0～10V or 0/4～20mA
1 programmable open collector output: 1 analog output (open collector output or high-speed pulse output) 2 relay output 2 analog output: 0/4~20mA or 0~10V
Offer RS485 communication interface, support MODBUS-RTU communication protocol
Human machine interface
Display frequency setting, output frequency, output voltage, output current, etc.
QUICK/JOG key, can be used as multifunction key
-10℃～40℃, derated 4% when the temperature rise by every 1℃(40℃～50℃).
90%RH or less (non-condensing)
≤1000M: output rated power, ＞1000M: output derated
Indoor, no direct sunlight, dust, corrosive gas, flammable gas, oil mist, steam, dripping water, salt, vibration
1AC 220V/230V/240V -15%~15%
3AC 380V/400V/415V -15%~15%
Leave us Message